| Author |
Message |
Red66v
Advanced Member
Post Number: 41
Registered: 10-2008
| Monday, January 25, 2010 - 6:01 pm     |
i've been working over the past year on a former members 65 Barracuda that ate a curb. Everything in the front end was bent. We straighted the left frame rail, gathered all the needed parts (K frame, LCAs UCA, sway bar...everything) We pulled the tired non original 273, and have a318 to put in place. Lots of rust...most notably in the cowl. Not a fun repair but doable. Here's some early picts...then later in process... enjoy.
Mike    |
|
|
Donc1965
Senior Member
Post Number: 434
Registered: 1-2006
| Monday, January 25, 2010 - 6:06 pm |
Nice work. Looks like you've got a nice garage to work in too!
Don |
1965 Barracuda Commando V8 (non Formula S)
Rocky Hill, CT
|
Red66v
Advanced Member
Post Number: 42
Registered: 10-2008
| Monday, January 25, 2010 - 6:12 pm |
more    |
|
|
Red66v
Advanced Member
Post Number: 43
Registered: 10-2008
| Monday, January 25, 2010 - 6:13 pm |
| more |
|
|
Red66v
Advanced Member
Post Number: 44
Registered: 10-2008
| Monday, January 25, 2010 - 6:16 pm |
more   |
|
|
Krazymofugger
Intermediate Member
Post Number: 26
Registered: 11-2009
| Tuesday, January 26, 2010 - 5:03 am |
| That looks great! I plan on fixing the cowl in mw barracuda.Thanks for the pics |
|
|
Red66v
Advanced Member
Post Number: 48
Registered: 10-2008
| Tuesday, February 02, 2010 - 2:31 pm |
finished the cowl today  |
|
|
65s
Member
Post Number: 13
Registered: 7-2009
| Friday, February 05, 2010 - 12:34 am |
| That's great to see the progress and to know another Barracuda is heading back on the road. It must be good to have lots of work space. It would be great if more members put up pics of their projects. What may seem boring to you may be of great interest to others! |
|
|
Terryr
Senior Member
Post Number: 58
Registered: 3-2009
| Friday, February 05, 2010 - 11:18 am |
| great work,,thats one place i never checked on my car ,i had to run out to the garage and check,but its all good |
|
|
Red66v
Advanced Member
Post Number: 50
Registered: 10-2008
| Wednesday, February 17, 2010 - 12:44 pm |
progress. new prop valve and lines installed. |
|
|
